All engine gaskets should always be replaced during an overhaul. The easiest way to do this is to lubricate the gaskets with a little grease to make them stick to the housing and prevent them from being bent or damaged during installation. Sealing compound is only necessary if the housing is defective (scores in the sealing surface or similar). If a healthy motor housing drips nevertheless, it is usually strained or crooked. A strained housing is caused by unevenly tightened housing screws. Ideally the housing halves should be tightened evenly (crosswise!) with a torque wrench. The maximum value here is 6-8NM according to Piaggio - specification.
 

Engine gasket set -VESPA- PX80, PX125, PX150, Sprint Veloce - incl. O-ring

£8.95Price
  •  

    • Vespa Augsburg Vespa 150 Sprint (VLB1T)
    • Motovespa Vespa 125 CL (engine 9CL)
    • Motovespa Vespa 150 CL (engine 9NC)
    • Vespa (Piaggio) P 80 X (V8X1T, -1983)
    • Vespa (Piaggio) Vespa 150 (VBA1T)
    • Vespa (Piaggio) Vespa 150 (VBB1T)
    • Vespa (Piaggio) Vespa 150 (VBB2T)
    • Vespa (Piaggio) Vespa 150 Super (VBC1T)
    • Vespa (Piaggio) Vespa 150 GL (VLA1T)
    • Vespa (Piaggio) Vespa 150 Sprint (VLB1T)
    • Vespa (Piaggio) Vespa 150 Sprint Veloce (VLB1T)
    • Vespa (Piaggio) Vespa 125 GTR (VLB2T)
    • Vespa (Piaggio) P 150 X (VLX1T, -1980)
    • Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983)
    • Vespa (Piaggio) Vespa 125 (VNA1T)
    • Vespa (Piaggio) Vespa 125 (VNA2T)
    • Vespa (Piaggio) Vespa 125 (VNB1T)
    • Vespa (Piaggio) Vespa 125 (VNB3T)
    • Vespa (Piaggio) Vespa 125 (VNB4T)
    • Vespa (Piaggio) Vespa 125 (VNB5T)
    • Vespa (Piaggio) Vespa 125 (VNB6T)
    • Vespa (Piaggio) Vespa 125 Super (VNC1T)
    • Vespa (Piaggio) Vespa 125 GT (VNL2T)
    • Vespa (Piaggio) Vespa 125 TS (VNL3T)
    • Vespa (Piaggio) P 125 X (VNX1T, -1983)
    • Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)