All engine gaskets should always be replaced during an overhaul. The easiest way to do this is to lubricate the gaskets with a little grease to make them stick to the housing and prevent them from being bent or damaged during installation. Sealing compound is only necessary if the housing is defective (scores in the sealing surface or similar). If a healthy motor housing drips nevertheless, it is usually strained or crooked. A strained housing is caused by unevenly tightened housing screws. Ideally the housing halves should be tightened evenly (crosswise!) with a torque wrench. The maximum value here is 6-8NM according to Piaggio - specification.

Engine gasket set -VESPA- PX80, PX125, PX150, Sprint Veloce - incl. Oil Seals

£9.10Price
  •  

    • Motovespa Vespa 125 CL (engine 9CL)
    • Motovespa Vespa 150 CL (engine 9NC)
    • Vespa (Piaggio) P 80 X (V8X1T, -1983)
    • Vespa (Piaggio) PX 80 E FL (V8X1T, 1983-)
    • Vespa (Piaggio) PX 80 E FL Elestart (V8X1T, 1984-1990)
    • Vespa (Piaggio) Vespa 150 Super (VBC1T)
    • Vespa (Piaggio) Vespa 150 Sprint Veloce (VLB1T)
    • Vespa (Piaggio) Vespa 125 GTR (VLB2T)
    • Vespa (Piaggio) Cosa 150 CL (VLR1T)
    • Vespa (Piaggio) Cosa 150 CLX (VLR1T300)
    • Vespa (Piaggio) Cosa 150 FL (VLR2T)
    • Vespa (Piaggio) P 150 X (VLX1T, -1980)
    • Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
    • Vespa (Piaggio) PX 150 E (VLX1T, 1981-1983)
    • Vespa (Piaggio) Vespa 125 Super (VNC1T)
    • Vespa (Piaggio) Vespa 125 GT (VNL2T)
    • Vespa (Piaggio) Vespa 125 TS (VNL3T)
    • Vespa (Piaggio) Cosa 125 CL (VNR1T)
    • Vespa (Piaggio) Cosa 125 CLX (VNR1T300)
    • Vespa (Piaggio) Cosa 125 CLX (VNR1T301)
    • Vespa (Piaggio) P 125 X (VNX1T, -1983)
    • Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
    • Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
    • Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)